Summary of product information
- Appearance: Clear liquid
- Polymer type: Thermoplastic acrylic resins solution
- Category: Xylene
- Category: Thermoplastic Acrylic Resins
Product Information
A hard thermoplastic acrylic resin for high quality masonry paints and architectural coatings.
Product Supplementation
TYPICAL PROPERTIESFILM PROPERTIESFORMULATING GUIDELINESRECOMMENDATIONS FOR END-USESTORAGETECHNICAL INFORMATION
Appearance | Clear liquid |
Type | Thermoplastic acrylic resins solution |
Solvent | Xylene |
Solubility | Soluble in:
Partially soluble in:
|
Color
|
<50 |
Solids(%)(ASTM D-1259) | 58±1 |
Acid value(mg KOH/g)(ASTM D-1639) | 12-18 |
Tg(°C) | +42 |
Viscosity at 25°C (cP)(ASTM D-562) | 4000-9000 |
Density at 25°C(g/ml)(ASTM D-1475) | 0.98 |
Flash point(°C)(ASTM D-93) | 24 |
• High gloss, hard and flexible.
• Very good adhesion on alkaline surfaces(asphalt, concrete, etc.)
• Fast drying
• Tacryl MP-235 possesses a good pigment wetting capacity, good gloss and color retention, very good exterior durability, hardness, alkali & abrasion resistance.
• See our guide formulation for specific information
• Masonry paints & Primers
• Protective coatings on concrete and asbestos cement
• Architectural coatings
• Exterior wall and roof paints
• Marking paints
• Should be stored indoors in sealed containers for a maximum 24 months.
Similar Products
Custom Gallery: images not found